Papua New Guinea Rebar

The steel rebar for reinforced concrete refers to the straight or coiled steel rebar used for reinforced concrete reinforcement. Its shape is divided into two types: smooth round steel rebar and deformed steel rebar. The delivery state is straight rebar and coiled round rebar. Due to the effect of the ribs, the deformed steel rebar has a greater bonding capacity with the concrete, so it can better withstand the external force. Steel rebars are widely used in various building structures. Especially large, heavy, light thin-walled and high-rise building structures.

Category:

Papua New GuineaSteel Rebar

Phone:400-888-8888

Inquire

Product Description

Application	Rebar
Type	For construction
Delivery Term	CFR, CIF, FOB, etc.
MOQ	1 Ton
Quality	High Quality
Delivery time	7-25 Days
Sample	Avaliable

Light round steel bars are actually small round bars and discs of ordinary low carbon steel.
Deformed bars are ribbed bars on the surface, usually with 2 longitudinal ribs and transverse ribs evenly distributed along the length. The shape of the transverse rib is spiral, herringbone and crescent. The nominal diameter of a deformed steel bar is equivalent to the nominal diameter of a light round steel bar of equal cross-section. The nominal diameter of the steel bar is 8-50 mm, and the recommended diameters are 8, 12, 16, 20, 25, 32, 40 mm. Steel types: 20MnSi, 20MnV, 25MnSi, BS20MnSi.

Mechanical properties of steel rebars:

Grade	Nominal Diameter mm	σs(or σp0.2)Mpa	σbMPa	δ5%
HRB335	6-25 28-50	335	490	16
HRB400	6-25 28-50	400	570	14
HRB500	6-25 28-50	500	630	12

2) The total elongation δgt of the steel bar under the maximum force is not less than 2.5%. If the supplier can guarantee it, no inspection is required.

3) According to the requirements of the buyer, steel bars that meet the following conditions can be supplied:

a) The ratio of the measured tensile strength of the steel bar to the measured yield point is not less than 1.25;

b) The ratio of the measured yield point of the steel bar to the minimum yield point specified in the above table is not greater than 1.30.

Steel rebars commonly used in reinforced concrete engineering:

(1) Steel for reinforced concrete Part 1: Hot-rolled smooth round steel rebar GB/T 1499.1-2017

(2) Steel for reinforced concrete Part 2: Hot-rolled ribbed steel rebars GB1499.2-2018

(3) Steel for reinforced concrete Part 3: Welded steel mesh GB1499.3-2010

(4) GB13014-2013 waste heat treatment steel rebars for reinforced concrete

(5) Low carbon steel hot-rolled round wire rod GB/T701-2008

(6) Cold-rolled ribbed steel rebar GB13788-2000

(7) Steel wire for prestressed concrete GB/T5223-2002

(8) Low alloy steel wire YB/T038-93 for prestressed concrete

(9) Steel strand for prestressed concrete GB/T5224-2003

(10) Steel strand for prestressed concrete ASTMA416-98A

(11) Cold-rolled twisted steel rebar JG3046-1998

(12) Cold-drawn spiral steel rebar DBJ14-BG3-96

Papua New Guineanone

Papua New GuineaHRB500 Deformed Steel Rebars

: next page

Tel : +8615806975270
Email : manager@sdsanjinsteel.com
WhatsApp：+8615806975270
Add : Room 809, Unit 1, Building 7, Block A-4, Jinan Huazhi Wanxiang Tiandi, Lixia District, Jinan City, Shandong Province, China

GET A FREE QUOTE